SPO – Wheel and caster series
Heavy duty nylon wheels and casters
Heavy duty wheels and casters in the SPO series are made from high-quality injection-moulded nylon. The wheels are resistant to many aggressive substances. With a hardness of 70 Shore D, the wheels offer a particularly low level of rolling resistance on smooth surfaces.
The SPO series is primarily used for industrial and hygiene applications. SPO wheels and casters are frequently used for packaging machines. The PO series is suitable for applications with a lower load capacity.
-
SPOG – Wheels
The SPOG wheel series has diameters ranging between 3 ¹⁄₈ and 10 inch as standard and comes with a ball bearing.
-
SPOG – Swivel casters with plate
As standard, the SPOG series is available with a range of rig series with a top plate fitting. These vary in terms of their design and load capacity:
LEH series: Pressed steel swivel rig with top plate fitting, heavy duty design
LH series: Pressed steel swivel rig with top plate fitting, heavy duty design
LS series: Heavy duty welded steel swivel rig with top plate fitting, heavy duty swivel headA detailed description and a comparison of the rig series are available in our guide. Additional information about the brake systems which are available is provided after the base product is selected.
-
SPOG – Swivel casters with bolt hole
As an alternative to the plate fitting, the Blickle range also contains a rig series with a bolt hole for the SPOG series:
LKR series: Pressed steel swivel rig with bolt hole, heavy duty design
A detailed description of the LKR rig is available in our guide. Suitable brake systems for each base product are covered in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LKR-SPO 75G 3 1 ¹⁄₄ 660 plain bore 4 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁹⁄₁₆ LKR-SPO 75K 3 1 ¹⁄₄ 660 ball bearing 4 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁹⁄₁₆ LKR-SPO 80G 3 ¹⁄₈ 1 ⁷⁄₁₆ 770 plain bore 4 ⁵⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁹⁄₁₆ LKR-SPO 80K 3 ¹⁄₈ 1 ⁷⁄₁₆ 770 ball bearing 4 ⁵⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁹⁄₁₆ LKR-SPO 100G 4 1 ⁷⁄₁₆ 770 plain bore 5 ¹⁄₈ 3 ⁷⁄₁₆ ¹⁄₂ 1 ³⁄₄ LKR-SPO 100K 4 1 ⁷⁄₁₆ 770 ball bearing 5 ¹⁄₈ 3 ⁷⁄₁₆ ¹⁄₂ 1 ³⁄₄ LKR-SPO 125G 5 1 ⁹⁄₁₆ 770 plain bore 6 ¹⁄₈ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁷⁄₈ LKR-SPO 125K 5 1 ⁹⁄₁₆ 770 ball bearing 6 ¹⁄₈ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁷⁄₈ -
SPOG – Rigid casters
Blickle also provides suitable castors with rigid rigs corresponding to the various swivel caster series:
BEHS series: Pressed steel rigid rig with top plate fitting, heavy duty design
BHS series: Pressed steel rigid rig with top plate fitting, heavy duty design
BS series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty designA detailed description of the differences between the rig series is provided in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Stem Ø
[inch]Stem length
[inch]Offset
[inch]LHZ-SPO 127G 5 2 1,655 plain bore 6 ¹¹⁄₁₆ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ³⁄₁₆ LHZ-SPO 127K 5 2 1,655 ball bearing 6 ¹¹⁄₁₆ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ³⁄₁₆ LHZ-SPO 150G 6 2 1,765 plain bore 7 ³⁄₄ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ⁹⁄₁₆ LHZ-SPO 150K 6 2 1,765 ball bearing 7 ³⁄₄ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ⁹⁄₁₆ LHZ-SPO 160G 6 ⁵⁄₁₆ 2 1,875 plain bore 7 ¹⁵⁄₁₆ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ⁹⁄₁₆ LHZ-SPO 160K 6 ⁵⁄₁₆ 2 1,875 ball bearing 7 ¹⁵⁄₁₆ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ⁹⁄₁₆ LHZ-SPO 200G 8 2 1,985 plain bore 9 ⁵⁄₈ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ³⁄₄ LHZ-SPO 201G 8 2 1,985 plain bore 9 ⁵⁄₈ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ³⁄₄ LHZ-SPO 200K 8 2 1,985 ball bearing 9 ⁵⁄₈ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ³⁄₄ LHZ-SPO 201K 8 2 1,985 ball bearing 9 ⁵⁄₈ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ³⁄₄ -
-