POES – Wheel and caster series
Wheels and casters with “Blickle SoftMotion” soft rubber tires and nylon wheel center
The gray tread of the POES soft rubber series is non-marking and made from the high quality “Blickle SoftMotion” rubber compound with a hardness of 55 Shore A.It is vulcanised onto the impact-resistant nylon wheel center, which makes the wheels capable of handling significant lateral loads. The extra-thick tread with a specially tailored contour provides outstanding floor surface preservation and smooth rolling performance, a low level of rolling resistance and a high level of operational comfort.
The POES soft rubber series offers the optimal solution for all applications where excellent damping of the transported goods and significant noise reduction are vitally important. The ALES series can be used for higher speeds.
-
POES – Wheels
The POES wheel series is available in sizes ranging between 3 ¹⁄₈ and 8 inch. The wheels have either one or two centrally encapsulated ball bearings, depending on the wheel size. A thread guard protects them against water spray. The wheels in the POES series can be provided with a corrosion-resistant ball bearing.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]POES 80/8KF-SG 3 ¹⁄₈ 1 ⁹⁄₁₆ 245 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POES 80/8XKF-SG 3 ¹⁄₈ 1 ⁹⁄₁₆ 245 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POES 100/8KF-SG 4 1 ⁹⁄₁₆ 330 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POES 100/8XKF-SG 4 1 ⁹⁄₁₆ 330 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POES 125/8KA-SG 5 1 ⁹⁄₁₆ 385 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POES 125/8XKA-SG 5 1 ⁹⁄₁₆ 385 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POES 150/12KA-SG 6 2 615 ball bearing (CC) ¹⁄₂ 2 ⁷⁄₁₆ POES 150/12XKA-SG 6 2 615 ball bearing (CC) ¹⁄₂ 2 ⁷⁄₁₆ POES 160/12KA-SG 6 ⁵⁄₁₆ 2 660 ball bearing (CC) ¹⁄₂ 2 ⁷⁄₁₆ POES 160/12XKA-SG 6 ⁵⁄₁₆ 2 660 ball bearing (CC) ¹⁄₂ 2 ⁷⁄₁₆ POES 200/12KA-SG 8 2 770 ball bearing (CC) ¹⁄₂ 2 ⁷⁄₁₆ POES 200/12XKA-SG 8 2 770 ball bearing (CC) ¹⁄₂ 2 ⁷⁄₁₆ -
POES – Swivel casters with plate
The POES wheel series is available with a variety of rig series with a plate fitting. In terms of load bearing capacity, these range from a single pressed steel swivel caster through to heavy duty pressed steel swivel casters.
LE series: Pressed steel swivel rig with top plate fitting
LK series: Pressed steel swivel rig with top plate fitting, heavy duty designA comparison of the rig series is available in our guide. Suitable brake system versions for each base product are provided in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LK-POES 80KF-SG 3 ¹⁄₈ 1 ⁹⁄₁₆ 245 ball bearing (C) 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LKPA-POES 102KF-SG 4 1 ¹⁄₄ ball bearing (C) 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ LE-POES 100KF-SG 4 1 ⁹⁄₁₆ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LKPA-POES 127KF-SG 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ LE-POES 125KA-SG 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-POES 150KA-SG 6 2 615 ball bearing (CC) 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LEX-POES 150XKA-14-SG 6 2 615 ball bearing (CC) 7 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LEX-POES 150XKA-14-FI-SG 6 2 615 ball bearing (CC) 7 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LE-POES 160KA-SG 6 ⁵⁄₁₆ 2 660 ball bearing (CC) 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LE-POES 200KA-SG 8 2 660 ball bearing (CC) 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LEX-POES 200XKA-14-SG 8 2 660 ball bearing (CC) 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LEX-POES 200XKA-14-FI-SG 8 2 660 ball bearing (CC) 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ -
POES – Swivel casters with bolt hole
As an alternative to a plate fitting, the POES series is also available with a bolt hole fitting:
LER series: Pressed steel swivel rig with bolt hole
LKR series: Pressed steel swivel rig with bolt hole, heavy duty designA comparison of the various rigs and their features is available in the guide. The brake systems available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LKR-POES 80KF-SG 3 ¹⁄₈ 1 ⁹⁄₁₆ 245 ball bearing (C) 4 ⁵⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁹⁄₁₆ LER-POES 100KF-SG 4 1 ⁹⁄₁₆ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-POES 125KA-SG 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ -
POES – Rigid casters
Blickle also provides suitable casters with rigid rigs for all of the swivel caster series.
B series: Pressed steel rigid rig with top plate fitting, medium duty design
BK series: Pressed steel rigid rig with top plate fitting, heavy duty designThe properties of each individual rigid caster series are listed in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]BK-POES 80KF-SG 3 ¹⁄₈ 1 ⁹⁄₁₆ 245 ball bearing (C) 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-POES 100KF-SG 4 1 ⁹⁄₁₆ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-POES 125KA-SG 5 1 ⁹⁄₁₆ 385 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-POES 150KA-SG 6 2 615 ball bearing (CC) 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BESX-POES 150XKA-14-SG 6 2 615 ball bearing (CC) 7 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 B-POES 160KA-SG 6 ⁵⁄₁₆ 2 660 ball bearing (CC) 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BESX-POES 200XKA-14-SG 8 2 660 ball bearing (CC) 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 B-POES 200KA-SG 8 2 770 ball bearing (CC) 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32