SE – Wheel and caster series

Heavy duty wheels and casters with elastic solid rubber tires “Blickle EasyRoll” and welded steel wheel center or nylon wheel center

SE wheel and caster series with elastic solid rubber tires
The wheel center of the SE series is made of triple-welded pressed steel with a tubular steel hub, onto which the high-quality elastic solid rubber tread is vulcanised. The tread is pressed onto the wheel center for items with a suffix of -Z. The black tread is very quiet and has very good floor preservation properties. The tires have a hardness of 65 Shore A and provide a very high level of operational comfort. The wheels are designed specifically for the transport of heavy loads in a wide range of applications. Speeds of up to 10 mph are possible thanks to the rugged design.
  • SE – Wheels
    SE wheels

    Wheels in the SE series have diameters ranging between 3 ¹⁄₈ and 16 ⁵⁄₁₆ inch and are available with a ball bearing. The wheels are also available with a non-marking gray tire.


    		 Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 2.5 mph
    [lbs]    		 Load capacity
    at 6 mph
    [lbs]    		 Bearing type


    		 Axle bore Ø

    [inch]    		 Hub
    length
    [inch]
    SE 80/20K 3 ¹⁄₈ 1 ³⁄₄ 440 ball bearing ¹³⁄₁₆ 1 ³⁄₄
    SE 100/20K 4 1 ³⁄₄ 595 ball bearing ¹³⁄₁₆ 1 ³⁄₄
    SE 125/20K 5 2 ¹⁄₁₆ 705 395 ball bearing ¹³⁄₁₆ 2 ³⁄₈
    SE 160/20K 6 ⁵⁄₁₆ 2 990 550 ball bearing ¹³⁄₁₆ 2 ³⁄₈
    SE 200/20K 8 2 1,325 770 ball bearing ¹³⁄₁₆ 2 ³⁄₈
    SE 200/25K 8 2 1,325 770 ball bearing 1 2 ³⁄₈
    SE 202/25K 8 3 ¹⁄₈ 1,875 1,100 ball bearing 1 3 ⁹⁄₁₆
    SE 250/25K 10 2 ¹⁄₂ 1,875 1,100 ball bearing 1 2 ³⁄₄
    SE 252/25K 10 3 ¹⁄₈ 2,205 1,325 ball bearing 1 3 ⁹⁄₁₆
    SE 252/30K 10 3 ¹⁄₈ 2,205 1,325 ball bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆
    SE 300/30K 12 3 2,205 1,435 ball bearing 1 ³⁄₁₆ 3 ³⁄₈
    SE 360/30K-Z 14 ³⁄₁₆ 3 2,095 1,675 ball bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆
    SE 400/35K-Z 15 ³⁄₄ 2 ⁹⁄₁₆ 1,985 1,585 ball bearing 1 ³⁄₈ 3
    SE 415/35K-Z 16 ⁵⁄₁₆ 3 ⁹⁄₁₆ 2,535 2,030 ball bearing 1 ³⁄₈ 4
    To the product finder
  • SE – Swivel casters with plate
    SE swivel casters with plate

    As standard, the SE wheel series is available with a variety of rig series with a plate fitting - from heavy duty pressed steel swivel casters through to heavy duty welded steel swivel casters:

    LK series: Pressed steel swivel rig with top plate fitting, heavy duty design
    LH series: Pressed steel swivel rig with top plate fitting, heavy duty design
    LO series: Heavy duty welded steel swivel rig with top plate fitting
    LS series: Heavy duty welded steel swivel rig with top plate fitting, heavy duty swivel head

    A detailed description of the various rig series is available in our guide. Suitable braking options for each base product are listed in the relevant section.


    		Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 2.5 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate
    dimensions
    [inch]    		 Bolt hole
    spacing
    [inch]    		 Bolt
    hole Ø
    [inch]    		 Offset

    [inch]
    LH-SE 80K 3 ¹⁄₈ 1 ³⁄₄ 440 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄
    LK-SE 80K 3 ¹⁄₈ 1 ³⁄₄ 440 ball bearing 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆
    LH-SE 100K-1 4 1 ³⁄₄ 595 ball bearing 5 ¹⁄₂ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄
    LK-SE 100K-1 4 1 ³⁄₄ 595 ball bearing 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄
    LH-SE 100K-3 4 1 ³⁄₄ 595 ball bearing 5 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ³⁄₄
    LK-SE 100K-3 4 1 ³⁄₄ 595 ball bearing 5 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ³⁄₄
    LH-SE 125K 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₁₆
    LK-SE 125K 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₁₆
    LO-SE 125K 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2
    LS-SE 125K 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2
    LS-SE 125K-16 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 2
    LH-SE 160K 6 ⁵⁄₁₆ 2 990 ball bearing 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆
    LK-SE 160K 6 ⁵⁄₁₆ 2 990 ball bearing 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    LO-SE 160K 6 ⁵⁄₁₆ 2 990 ball bearing 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₁₆
    LS-SE 160K 6 ⁵⁄₁₆ 2 990 ball bearing 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₁₆
    LS-SE 160K-16 6 ⁵⁄₁₆ 2 990 ball bearing 8 ¹⁄₁₆ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 2 ³⁄₁₆
    LH-SE 200K 8 2 1,325 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₄
    LK-SE 200K 8 2 1,325 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁷⁄₁₆
    LO-SE 200K 8 2 1,325 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    LS-SE 200K 8 2 1,325 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    LS-SE 200K-16 8 2 1,325 ball bearing 9 ⁵⁄₈ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 2 ³⁄₈
    LH-SE 202K 8 3 ¹⁄₈ 1,765 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₄
    LO-SE 202K 8 3 ¹⁄₈ 1,875 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆
    LS-SE 202K 8 3 ¹⁄₈ 1,875 ball bearing 10 ¹⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 2 ⁹⁄₁₆
    LH-SE 250K 10 2 ¹⁄₂ 1,875 ball bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 3 ¹⁄₄
    LO-SE 250K 10 2 ¹⁄₂ 1,875 ball bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₄
    LS-SE 250K 10 2 ¹⁄₂ 1,875 ball bearing 12 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 3
    LS-SE 252K 10 3 ¹⁄₈ 2,205 ball bearing 12 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 3
    LS-SE 300K 12 3 2,205 ball bearing 14 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 3 ³⁄₈
    LS-SE 360K-Z 14 ³⁄₁₆ 3 2,095 ball bearing 16 ⁹⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 3 ³⁄₈
    LS-SE 415K-Z 16 ⁵⁄₁₆ 3 ⁹⁄₁₆ 2,535 ball bearing 18 ¹³⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 4
    To the product finder
  • SE – Rigid casters
    SE rigid casters

    The SE series provides matching rigid casters for all of the swivel caster series as part of the standard range:

    BK series: Pressed steel rigid rig with top plate fitting, heavy duty design
    BH series: Pressed steel rigid rig with top plate fitting, heavy duty design
    BO series: Heavy duty welded steel rigid rig with top plate fitting
    BS series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty design

    A detailed comparison of these rigid rigs is provided in our guide.


    		 Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 2.5 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate
    dimensions
    [inch]    		 Bolt hole
    spacing
    [inch]    		 Bolt
    hole Ø
    [inch]
    BH-SE 80K 3 ¹⁄₈ 1 ³⁄₄ 440 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    BK-SE 80K 3 ¹⁄₈ 1 ³⁄₄ 440 ball bearing 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    BH-SE 100K-1 4 1 ³⁄₄ 595 ball bearing 5 ¹⁄₂ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    BH-SE 100K-3 4 1 ³⁄₄ 595 ball bearing 5 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BK-SE 100K-1 4 1 ³⁄₄ 595 ball bearing 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    BK-SE 100K-3 4 1 ³⁄₄ 595 ball bearing 5 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BH-SE 125K 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BO-SE 125K 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BS-SE 125K 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BS-SE 125K-16 5 2 ¹⁄₁₆ 705 ball bearing 6 ¹¹⁄₁₆ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4
    BH-SE 160K 6 ⁵⁄₁₆ 2 990 ball bearing 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BO-SE 160K 6 ⁵⁄₁₆ 2 990 ball bearing 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BS-SE 160K 6 ⁵⁄₁₆ 2 990 ball bearing 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BS-SE 160K-16 6 ⁵⁄₁₆ 2 990 ball bearing 8 ¹⁄₁₆ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4
    BH-SE 200K 8 2 1,325 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BO-SE 200K 8 2 1,325 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BS-SE 200K 8 2 1,325 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BS-SE 200K-16 8 2 1,325 ball bearing 9 ⁵⁄₈ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4
    BO-SE 202K 8 3 ¹⁄₈ 1,875 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BS-SE 202K 8 3 ¹⁄₈ 1,875 ball bearing 10 ¹⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8
    BH-SE 250K 10 2 ¹⁄₂ 1,875 ball bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BO-SE 250K 10 2 ¹⁄₂ 1,875 ball bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BS-SE 250K 10 2 ¹⁄₂ 1,875 ball bearing 12 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8
    BS-SE 252K 10 3 ¹⁄₈ 2,205 ball bearing 12 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8
    BS-SE 300K 12 3 2,205 ball bearing 14 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8
    BS-SE 360K-Z 14 ³⁄₁₆ 3 2,095 ball bearing 16 ⁹⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8
    BS-SE 415K-Z 16 ⁵⁄₁₆ 3 ⁹⁄₁₆ 2,535 ball bearing 18 ¹³⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4
    To the product finder
  • SE – Twin casters
    SE twin casters

    Wheels in the SE series are also available as a twin caster with a welded steel rig:

    LHD series: Pressed steel twin wheel swivel rig with top plate fitting, heavy duty design
    BOD series: Heavy duty welded steel rigid rig with top plate fitting
    LSD series: Heavy duty welded steel swivel rig with top plate fitting, heavy duty swivel head
    BSD series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty design

    The differences between each rig series are covered in detail in the guide. The different brake systems available for each base product are provided in the relevant section.


    		 Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Number of
    wheels

    		 Load capacity
    at 2.5 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate
    dimensions
    [inch]    		 Bolt hole
    spacing
    [inch]    		 Bolt
    hole Ø
    [inch]    		 Offset

    [inch]
    BOD-SE 80K 3 ¹⁄₈ 1 ³⁄₄ 2 795 ball bearing 4 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    LHD-SE 80K-3 3 ¹⁄₈ 1 ³⁄₄ 2 795 ball bearing 4 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ³⁄₄
    BSD-SE 160K-35 6 ⁵⁄₁₆ 2 2 1,985 ball bearing 8 ¹¹⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8
    LSD-SE 160K-35 6 ⁵⁄₁₆ 2 2 1,985 ball bearing 8 ¹¹⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 2 ³⁄₁₆
    BSD-SE 200K-35 8 2 2 2,645 ball bearing 10 ¹⁄₄ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8
    LSD-SE 200K-35 8 2 2 2,645 ball bearing 10 ¹⁄₄ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 2 ³⁄₈
    BSD-SE 250K 10 2 ¹⁄₂ 2 3,750 ball bearing 13 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16
    LSD-SE 250K 10 2 ¹⁄₂ 2 3,750 ball bearing 13 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 2 ³⁄₄
    BSD-SE 300K 12 3 2 4,410 ball bearing 14 ¹⁵⁄₁₆ 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16
    LSD-SE 300K 12 3 2 4,410 ball bearing 14 ¹⁵⁄₁₆ 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 3 ¹⁄₈
    To the product finder